Tlc2252aidr soic-8 operational amplifier sold at a low price
Tlc2252 and tlc2254 are dual and quad operational amplifiers from Texas Instruments. Both devices exhibit increased dynamic range railway output performance in single or sub power applications. Each channel of tlc225x series consumes only 35 µ a power supply current. This micro power operation makes them a good choice for battery powered applications. Compared with previous generations of CMOS amplifiers, the noise performance has been significantly improved. Please refer to figure 1. The noise level of tlc225x at 1kHz is 19nv / √ Hz; 4 times lower than competitive micro power solutions.
Tlc225x amplifier shows high input impedance and low noise, which is very suitable for small signal regulation of high impedance sources, such as piezoelectric sensors. Due to the level of micro power consumption, these devices are well used in handheld monitoring and remote sensing applications. In addition, the railway to digital converter has the railway output function of single or split power supply, which makes this series a good choice when interfacing with analog to digital converter (ADC). For precision applications, the tlc225xa series is available with a large input offset voltage of 850 µ v. The family is between 5V and ± 5V.
Tlc2252 / 4 has also greatly upgraded tlc27l2 / L4 or ts27l2 / L4 in the standard design. They provide increased output dynamic range, * low noise voltage, and * low input offset voltage. This enhanced feature set allows them to be used in * a wide range of applications. For applications that require * high output drivers and * wide input voltage ranges, see tlv2432 and tlv2442 devices. If the design requires a single amplifier, please refer to TLV2211 / 21 / 31 series. These devices are monorail to rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal devices with high density and battery power supply.
The output swing consists of two supply rails
Low noise. Typical value of Hz at Nevada 19 / √ f = 1 kHz
Low input bias current. 1 pa typical
*For single and sub power operation
Very low power. Typical value of each channel: 35 µ a
The common mode input voltage range includes the negative rail
Low input bias voltage
Greater 850 µ V (tlc225xa) at Ta = 25 ° C
Including macro model
Performance upgrade of ts27l2 / L4 and tlc27l2 / L4
Available in Q – temp Automotive
Highrel automotive applications
Configuration control / print support
Eligibility to automotive standards
Tlc225x amplifier shows high input impedance and low noise, which is very suitable for small signal regulation of high impedance sources, such as piezoelectric sensors. Due to the level of micro power consumption, these devices are well used in handheld monitoring and remote sensing applications. In addition, the railway to digital converter has the railway output function of single or split power supply, which makes this series a good choice when interfacing with analog to digital converter (ADC). For precision applications, the tlc225xa series is available with a large input offset voltage of 850 µ v. The family is between 5V and ± 5V.
Tlc2252 / 4 has also greatly upgraded tlc27l2 / L4 or ts27l2 / L4 in the standard design. They provide increased output dynamic range, * low noise voltage, and * low input offset voltage. This enhanced feature set allows them to be used in * a wide range of applications. For applications that require * high output drivers and * wide input voltage ranges, see tlv2432 and tlv2442 devices. If the design requires a single amplifier, please refer to TLV2211 / 21 / 31 series. These devices are monorail to rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal devices with high density and battery power supply.
The output swing consists of two supply rails
Low noise. Typical value of Hz at Nevada 19 / √ f = 1 kHz
Low input bias current. 1 pa typical
*For single and sub power operation
Very low power. Typical value of each channel: 35 µ a
The common mode input voltage range includes the negative rail
Low input bias voltage
Greater 850 µ V (tlc225xa) at Ta = 25 ° C
Including macro model
Performance upgrade of ts27l2 / L4 and tlc27l2 / L4
Available in Q – temp Automotive
Highrel automotive applications
Configuration control / print support
Eligibility to automotive standards