Sn65hvd234dr sop-8 can interface IC Ti price advantage
According to iso11898 standard, when using the physical layer of controller area network (can) serial communication, the applications of sn65hvd233, sn65hvd234, sn65hvd234 and sn65hvd235 will be used.
As a can transceiver, each transceiver provides the transmission and reception capacity between differential can bus and can controller, and the signaling rate can reach 1Mbps. The equipment is designed to operate in a particularly harsh environment, with cross line, overvoltage and grounding protection for ± 36V, over-temperature protection and ± 100V common mode transient protection.
These devices operate in the common mode range of - 7V to 12V, with up to 60 nodes on the bus. Characteristic bus pin fault protection over ± 36 V bus pin ESD protection over 16 kV HBM gift / ICT compatible (sn65hvd234) ISO 11898 compatible signaling rate (1) up to 1 Mbps extended – 7-V to 12-v common mode range high input impedance allows 120 node LVTTL I / O with 5-V tolerance adjustable driver transition time to improve signal quality no power node will not interfere with bus low current standby mode. 200 μ a typical low current sleep mode.
50 Na typical (sn65hvd234) hot shutdown protection power on / off fault free bus input and output
− high input impedance with low VCC
− single chip output during power cycle loopback with diagnostic function (sn65hvd233) loopback with automatic audio function available (sn65hvd235) DeviceNet vendor id#806
application
Can data bus industrial automation
− equipment network data bus
− intelligent distributed system (SDS)
SAE J1939 standard data bus interface
NMEA 2000 standard data bus interface
ISO 11783 standard data bus interface
As a can transceiver, each transceiver provides the transmission and reception capacity between differential can bus and can controller, and the signaling rate can reach 1Mbps. The equipment is designed to operate in a particularly harsh environment, with cross line, overvoltage and grounding protection for ± 36V, over-temperature protection and ± 100V common mode transient protection.
These devices operate in the common mode range of - 7V to 12V, with up to 60 nodes on the bus. Characteristic bus pin fault protection over ± 36 V bus pin ESD protection over 16 kV HBM gift / ICT compatible (sn65hvd234) ISO 11898 compatible signaling rate (1) up to 1 Mbps extended – 7-V to 12-v common mode range high input impedance allows 120 node LVTTL I / O with 5-V tolerance adjustable driver transition time to improve signal quality no power node will not interfere with bus low current standby mode. 200 μ a typical low current sleep mode.
50 Na typical (sn65hvd234) hot shutdown protection power on / off fault free bus input and output
− high input impedance with low VCC
− single chip output during power cycle loopback with diagnostic function (sn65hvd233) loopback with automatic audio function available (sn65hvd235) DeviceNet vendor id#806
application
Can data bus industrial automation
− equipment network data bus
− intelligent distributed system (SDS)
SAE J1939 standard data bus interface
NMEA 2000 standard data bus interface
ISO 11783 standard data bus interface