Price advantage of tps56200dbvr step-down switching regulator Ti
explain
The s5602-200 is a single chip soi-5602 synchronous converter with easy turn-on time, which is easy to be used in the integrated soi-200 pin.
The tps56200 helps system designers complete the set of power bus regulators for various terminal devices through a cost-effective solution with fewer components and low standby current. The main control loop of the device adopts D CAP2 mode control can realize * * transient response without external compensation elements. The adaptive on time control enables the device to seamlessly switch between PWM mode under high load conditions and advanced eco mode under light load conditions.
The proprietary circuit of tps56200 can also adapt it to low equivalent series resistance (ESR) output capacitors (such as conductive polymer tantalum solid electrolytic capacitor (poscap) and conductive polymer aluminum electrolytic capacitor (sp-cap)) and * low ESR ceramic capacitors. The device is powered by an input voltage in the range of 4.5V to 17V. The output voltage can be programmed in the range of 0.8 V to 6.5 v. The device also has a fixed soft start time of 2ms. The device is packaged in 5-pin SOT-23.
characteristic
• integrated monolithic 0.95 Ω high side and 0.33 Ω low side MOSFET
• 500mA continuous output current
• output voltage range: 0.8V to 6.5V
• 0.8V reference voltage with an accuracy of ± 1.3% within the temperature range
• advanced auto jump eco mode ™ Used to achieve high efficiency under light load
• D-CAP2 ™ Mode enable * * transient response
• no external compensation required
• 600kHz switching frequency
• 2ms internal soft start
• safe start to pre biased Vout
• thermal shutdown • - 40 ° C to 125 ° c operating junction temperature range
• 5-pin small overall size transistor (SOT) - 23 package
application
• set top box
• modem
• DTB
• ASDL
The s5602-200 is a single chip soi-5602 synchronous converter with easy turn-on time, which is easy to be used in the integrated soi-200 pin.
The tps56200 helps system designers complete the set of power bus regulators for various terminal devices through a cost-effective solution with fewer components and low standby current. The main control loop of the device adopts D CAP2 mode control can realize * * transient response without external compensation elements. The adaptive on time control enables the device to seamlessly switch between PWM mode under high load conditions and advanced eco mode under light load conditions.
The proprietary circuit of tps56200 can also adapt it to low equivalent series resistance (ESR) output capacitors (such as conductive polymer tantalum solid electrolytic capacitor (poscap) and conductive polymer aluminum electrolytic capacitor (sp-cap)) and * low ESR ceramic capacitors. The device is powered by an input voltage in the range of 4.5V to 17V. The output voltage can be programmed in the range of 0.8 V to 6.5 v. The device also has a fixed soft start time of 2ms. The device is packaged in 5-pin SOT-23.
characteristic
• integrated monolithic 0.95 Ω high side and 0.33 Ω low side MOSFET
• 500mA continuous output current
• output voltage range: 0.8V to 6.5V
• 0.8V reference voltage with an accuracy of ± 1.3% within the temperature range
• advanced auto jump eco mode ™ Used to achieve high efficiency under light load
• D-CAP2 ™ Mode enable * * transient response
• no external compensation required
• 600kHz switching frequency
• 2ms internal soft start
• safe start to pre biased Vout
• thermal shutdown • - 40 ° C to 125 ° c operating junction temperature range
• 5-pin small overall size transistor (SOT) - 23 package
application
• set top box
• modem
• DTB
• ASDL