The 3A filling / pulling DDR terminal voltage regulator of tps51200drcr buffer benchmark is original and in stock
explain
Tps51200 device is a double data rate (DDR) terminal voltage regulator with filling current and pulling current. It is specially designed for space constrained systems with low input voltage, low cost and low noise. Tps51200 can maintain fast transient response for only 20 minutes μ F ultra low output capacitance. Tps51200 supports remote sensing function and meets all power requirements of DDR, DDR2, DDR3, ddr3l, low-power DDR3 and ddr4vtt bus terminals.
In addition, tps51200 also provides an open drain PGOOD signal to monitor the output voltage stabilization, and an en signal to discharge VTT for DDR application during S3 (suspended to RAM). Tps51200 adopts high-efficiency heat dissipation 10 pin VSON package with heat dissipation pad, which has the characteristics of green environmental protection and lead-free. Its rated temperature range is - 40 ° C to + 85 ° C.
characteristic
• input voltage: support 2.5V and 3.3V power rails
• vldoin voltage range: 1.1V to 3.5V
• charging and pulling current terminal voltage regulator with voltage drop compensation function
• requires ultra-small output capacitance 20 μ F (usually 3) × ten μ Fmlcc), which can be used for memory terminal
Application (DDR)
• PGOOD for monitoring output voltage stabilization
• en input
• refin input allows flexible input tracking directly or through resistive voltage divider
• remote detection (vosns)
• ± 10mA buffer reference (refout)
• built in soft start, undervoltage lockout (UVLO) and overcurrent limit (OCL)
• thermal shutdown • supports DDR, DDR2, DDR3, ddr3l, low power DDR3 and DDR4 VTT
Apply
• 10 pin ultra thin small outline size leadless (VSON) package with heat dissipation pad
Apply
• memory terminal regulator for DDR, DDR2, DDR3, ddr3l, low power DDR3 and DDR4
• notebooks, desktops and servers
• telecommunications and data communications
• base station
• liquid crystal (LCD) TV and plasma (PDP) TV
• copiers and printers
• set top box
Tps51200 device is a double data rate (DDR) terminal voltage regulator with filling current and pulling current. It is specially designed for space constrained systems with low input voltage, low cost and low noise. Tps51200 can maintain fast transient response for only 20 minutes μ F ultra low output capacitance. Tps51200 supports remote sensing function and meets all power requirements of DDR, DDR2, DDR3, ddr3l, low-power DDR3 and ddr4vtt bus terminals.
In addition, tps51200 also provides an open drain PGOOD signal to monitor the output voltage stabilization, and an en signal to discharge VTT for DDR application during S3 (suspended to RAM). Tps51200 adopts high-efficiency heat dissipation 10 pin VSON package with heat dissipation pad, which has the characteristics of green environmental protection and lead-free. Its rated temperature range is - 40 ° C to + 85 ° C.
characteristic
• input voltage: support 2.5V and 3.3V power rails
• vldoin voltage range: 1.1V to 3.5V
• charging and pulling current terminal voltage regulator with voltage drop compensation function
• requires ultra-small output capacitance 20 μ F (usually 3) × ten μ Fmlcc), which can be used for memory terminal
Application (DDR)
• PGOOD for monitoring output voltage stabilization
• en input
• refin input allows flexible input tracking directly or through resistive voltage divider
• remote detection (vosns)
• ± 10mA buffer reference (refout)
• built in soft start, undervoltage lockout (UVLO) and overcurrent limit (OCL)
• thermal shutdown • supports DDR, DDR2, DDR3, ddr3l, low power DDR3 and DDR4 VTT
Apply
• 10 pin ultra thin small outline size leadless (VSON) package with heat dissipation pad
Apply
• memory terminal regulator for DDR, DDR2, DDR3, ddr3l, low power DDR3 and DDR4
• notebooks, desktops and servers
• telecommunications and data communications
• base station
• liquid crystal (LCD) TV and plasma (PDP) TV
• copiers and printers
• set top box