Stm32f103rct6 STM32F103VCT6 ARM microcontroller - MCU agent, lowest spot price
features
■ core: 32-bit cortex of arm ™- M3 CPU
– 72 MHz frequency,
Performance channel of 1.25 DMIPS / MHz (Dhrystone 2.1) 0 wait state memory
– single loop multiplication and hardware
separate
■ recall
– 256 to 512 KB flash memory
– SRAM up to 64 kb
– flexible static memory controller with 4 chip options. Support compact flash memory,
SRAM, PSRAM, nor and NAND memory
– LCD parallel interface, 8080 / 6800 mode
■ clock, reset and supply management
– 2.0 to 3.6 V application power supply and I / O
– por, PDR and programmable voltage detector (PVD)
– 4 to 16 MHz crystal oscillator
– internal 8 MHz factory trim RC
– internal 40 kHz RC with calibration
– 32 kHz oscillator for RTC with calibration
■ low power consumption
– sleep, stop and standby modes
– Vbat power supply for RTC and backup registers
■ 3 × 12 bit 1 µ s a / D converter (more than 21 channels)
– conversion range: 0 to 3.6 V
– triple sampling and holding capability
– temperature sensor
■ 2 × 12 bit D / a converter
■ DMA: 12 channel DMA controller
– peripherals supported: timer, ADC, DAC, SDIO, i2ss, SPI, i2cs and USART
■ commissioning mode
– serial line debugging (SWD) and JTAG interface
– Cortex-M3 embedded micro macro cells ™
■ 112 fast I / O ports
– 51 / 80 / 112 I / O, all I / O can be mapped to 16 external interrupt vectors and almost all 5V resistant
■ 11 more timers
– four more 16 bit timers, four more per timer
IC / OC / PWM or pulse counter and
Quadrature (incremental) encoder input
–2 × 16 bit motor controlled PWM timer with dead time generation and emergency stop
– 2 Watchdog Timers (and) (window)
– systick timer: 24 bit downlink counter
–2 × 16 bit basic timer for driving DAC
■ more than 13 communication interfaces
– more than 2 × I2C interface (SMBus / pmbus)
– 5 more USART (ISO 7816) interfaces, Lin, IrDA functions (modem control)
– 3 more SPIs (18 Mbit / s), 2 multiplexed with I2S interface
– can interface (2.0B active)
– USB 2.0 full speed interface
– SDIO interface
■ CRC calculation unit, 96 bit ID
■ ECOPACK ® packing
describe
Stm32f103xc, stm32f103xd and stm32f103xe performance line series integrate high-performance arm ® Cortex ™- The m332-bit RISC core operates at 72mhz, high-speed embedded memory (up to 512 kilobytes of flash memory and up to 64 kilobytes of SRAM), and extensive enhanced I / O and peripherals connected to two APB buses. All devices provide three 12 bit ADCs, four universal 16 bit timers and two PWM timers, as well as standard and communication interfaces: two more I2C, three SPI, two i2ss, one SDIO, five USARTs, one USB and one can.
Stm32f103xx high density performance line series operates in the temperature range of - 40 to + 105 ° C, from 2.0 to 3.6V power supply. A comprehensive set of energy-saving models allows the design of low-power applications.
These characteristics make the stm32f103xx high-density performance line microcontroller series suitable for a wide range of applications, such as motor drivers, application control, medical and handheld devices, PC and game peripherals, GPS platform, industrial applications, PLC, inverter, printer, scanner, alarm system video walkie talkie and HVAC.
■ core: 32-bit cortex of arm ™- M3 CPU
– 72 MHz frequency,
Performance channel of 1.25 DMIPS / MHz (Dhrystone 2.1) 0 wait state memory
– single loop multiplication and hardware
separate
■ recall
– 256 to 512 KB flash memory
– SRAM up to 64 kb
– flexible static memory controller with 4 chip options. Support compact flash memory,
SRAM, PSRAM, nor and NAND memory
– LCD parallel interface, 8080 / 6800 mode
■ clock, reset and supply management
– 2.0 to 3.6 V application power supply and I / O
– por, PDR and programmable voltage detector (PVD)
– 4 to 16 MHz crystal oscillator
– internal 8 MHz factory trim RC
– internal 40 kHz RC with calibration
– 32 kHz oscillator for RTC with calibration
■ low power consumption
– sleep, stop and standby modes
– Vbat power supply for RTC and backup registers
■ 3 × 12 bit 1 µ s a / D converter (more than 21 channels)
– conversion range: 0 to 3.6 V
– triple sampling and holding capability
– temperature sensor
■ 2 × 12 bit D / a converter
■ DMA: 12 channel DMA controller
– peripherals supported: timer, ADC, DAC, SDIO, i2ss, SPI, i2cs and USART
■ commissioning mode
– serial line debugging (SWD) and JTAG interface
– Cortex-M3 embedded micro macro cells ™
■ 112 fast I / O ports
– 51 / 80 / 112 I / O, all I / O can be mapped to 16 external interrupt vectors and almost all 5V resistant
■ 11 more timers
– four more 16 bit timers, four more per timer
IC / OC / PWM or pulse counter and
Quadrature (incremental) encoder input
–2 × 16 bit motor controlled PWM timer with dead time generation and emergency stop
– 2 Watchdog Timers (and) (window)
– systick timer: 24 bit downlink counter
–2 × 16 bit basic timer for driving DAC
■ more than 13 communication interfaces
– more than 2 × I2C interface (SMBus / pmbus)
– 5 more USART (ISO 7816) interfaces, Lin, IrDA functions (modem control)
– 3 more SPIs (18 Mbit / s), 2 multiplexed with I2S interface
– can interface (2.0B active)
– USB 2.0 full speed interface
– SDIO interface
■ CRC calculation unit, 96 bit ID
■ ECOPACK ® packing
describe
Stm32f103xc, stm32f103xd and stm32f103xe performance line series integrate high-performance arm ® Cortex ™- The m332-bit RISC core operates at 72mhz, high-speed embedded memory (up to 512 kilobytes of flash memory and up to 64 kilobytes of SRAM), and extensive enhanced I / O and peripherals connected to two APB buses. All devices provide three 12 bit ADCs, four universal 16 bit timers and two PWM timers, as well as standard and communication interfaces: two more I2C, three SPI, two i2ss, one SDIO, five USARTs, one USB and one can.
Stm32f103xx high density performance line series operates in the temperature range of - 40 to + 105 ° C, from 2.0 to 3.6V power supply. A comprehensive set of energy-saving models allows the design of low-power applications.
These characteristics make the stm32f103xx high-density performance line microcontroller series suitable for a wide range of applications, such as motor drivers, application control, medical and handheld devices, PC and game peripherals, GPS platform, industrial applications, PLC, inverter, printer, scanner, alarm system video walkie talkie and HVAC.