Tms320f28027ptt LQFP-48 Ti has the lowest inventory clearing price
Description of tms320f28027
C2000 ™ 32-bit microcontrollers are optimized in processing, sensing and driving to improve closed-loop performance in real-time control applications, such as industrial motor drives, photovoltaic inverters and digital power supplies, electric vehicles and transportation, motor control, and sensing and signal processing. C2000 product line includes Delfino ™ High performance family and piccolo ™ Entry level performance family.
F2802x Piccolo ™ Series microcontrollers are packaged with low pin count devices and combined with highly integrated control peripherals to provide powerful functions of c28x core. The code of this series of devices is compatible with the old code based on c28x, and has high analog integration.
An internal regulator enables single power rail operation. The hrpwm module is enhanced to realize double edge control (frequency modulation). An analog comparator with 10 bit internal reference is added, which can be directly routed to control PWM output. ADC can implement conversion within the fixed full scale range of 0V to 3.3V, and support the proportional operation of vrefhi/vreflo benchmarks. ADC interfaces have been optimized for low overhead and latency.
Characteristics of tms320f28027
High efficiency 32-bit CPU (TMS320C28X)
60MHz (16.67ns cycle time)
50MHz (20ns cycle time)
40MHz (25ns cycle time)
sixteen × 16 and 32 × 32 MAC operation
sixteen × 16 dual mac
Harvard bus architecture
Linked operation
Fast interrupt response and handling
Unified memory programming model
Efficient code (using c/c++ and assembly language)
Byte order: small endian
Low cost devices and systems:
3.3V single power supply
No power sequencing required
Integrated power on and undervoltage reset
Available in small packages as low as 38 pins
low power
No analog support pin
Timing:
Two internal zero pin oscillators
On chip crystal oscillator and external clock input
Watchdog timer module
Lost clock detection circuit
Up to 22 individually programmable multiplexed GPIO pins with input filtering
Peripheral interrupt extension (PIE) module supporting all peripheral interrupts
Three 32-bit CPU timers
Each enhanced pulse width modulator (epwm) has a separate 16 bit timer
On chip memory
Flash memory, SRAM, OTP, boot ROM available
Code security module
128 bit security keys and locks
Secure memory block
Prevent firmware reverse engineering
Serial port peripherals
One serial communication interface (SCI) universal asynchronous receiver / transmitter (UART) module
A serial peripheral interface (SPI) module
An internal integrated circuit (I2C) module
Enhanced control peripherals
Epwm
High resolution PWM (hrpwm)
Enhanced capture (ECAP) module
Analog to digital converter (ADC)
On chip temperature sensor
comparator
Advanced simulation features
Analysis and breakpoint functions
Real time debugging through hardware
Encapsulation options
38 pin Da thin small overall dimension package (tssop)
48 pin Pt thin square flatpack (LQFP)
Temperature options
T: -40 ° C to 105 ° C
S: -40 ° C to 125 ° C
Q: – 40 ° C to 125 ° C
(by targeting automotive applications)
C2000 ™ 32-bit microcontrollers are optimized in processing, sensing and driving to improve closed-loop performance in real-time control applications, such as industrial motor drives, photovoltaic inverters and digital power supplies, electric vehicles and transportation, motor control, and sensing and signal processing. C2000 product line includes Delfino ™ High performance family and piccolo ™ Entry level performance family.
F2802x Piccolo ™ Series microcontrollers are packaged with low pin count devices and combined with highly integrated control peripherals to provide powerful functions of c28x core. The code of this series of devices is compatible with the old code based on c28x, and has high analog integration.
An internal regulator enables single power rail operation. The hrpwm module is enhanced to realize double edge control (frequency modulation). An analog comparator with 10 bit internal reference is added, which can be directly routed to control PWM output. ADC can implement conversion within the fixed full scale range of 0V to 3.3V, and support the proportional operation of vrefhi/vreflo benchmarks. ADC interfaces have been optimized for low overhead and latency.
Characteristics of tms320f28027
High efficiency 32-bit CPU (TMS320C28X)
60MHz (16.67ns cycle time)
50MHz (20ns cycle time)
40MHz (25ns cycle time)
sixteen × 16 and 32 × 32 MAC operation
sixteen × 16 dual mac
Harvard bus architecture
Linked operation
Fast interrupt response and handling
Unified memory programming model
Efficient code (using c/c++ and assembly language)
Byte order: small endian
Low cost devices and systems:
3.3V single power supply
No power sequencing required
Integrated power on and undervoltage reset
Available in small packages as low as 38 pins
low power
No analog support pin
Timing:
Two internal zero pin oscillators
On chip crystal oscillator and external clock input
Watchdog timer module
Lost clock detection circuit
Up to 22 individually programmable multiplexed GPIO pins with input filtering
Peripheral interrupt extension (PIE) module supporting all peripheral interrupts
Three 32-bit CPU timers
Each enhanced pulse width modulator (epwm) has a separate 16 bit timer
On chip memory
Flash memory, SRAM, OTP, boot ROM available
Code security module
128 bit security keys and locks
Secure memory block
Prevent firmware reverse engineering
Serial port peripherals
One serial communication interface (SCI) universal asynchronous receiver / transmitter (UART) module
A serial peripheral interface (SPI) module
An internal integrated circuit (I2C) module
Enhanced control peripherals
Epwm
High resolution PWM (hrpwm)
Enhanced capture (ECAP) module
Analog to digital converter (ADC)
On chip temperature sensor
comparator
Advanced simulation features
Analysis and breakpoint functions
Real time debugging through hardware
Encapsulation options
38 pin Da thin small overall dimension package (tssop)
48 pin Pt thin square flatpack (LQFP)
Temperature options
T: -40 ° C to 105 ° C
S: -40 ° C to 125 ° C
Q: – 40 ° C to 125 ° C
(by targeting automotive applications)