Tps7b7702qpwprq1 single channel and dual channel antenna LDO with current sensing function is new in stock
Characteristics of tps7b7702-q1
Meet the requirements of automotive applications
It has the following characteristics in accordance with aec-q100 standard:
Device temperature level 1: ambient operating temperature range from – 40 ° C to 125 ° C
Device human body discharge mode (HBM) electrostatic discharge (ESD) classification level 2
Device component charging mode (CDM) ESD classification level C4B
Single channel and dual channel low voltage drop regulators (LDOS) with current detection and adjustable current limiting functions
4.5V to 40V wide input voltage range, 45V load sudden drop protection
Enter the power switch mode when FB is connected to GND
1.5V to 20V adjustable output voltage
The output current of each channel is up to 300mA
Adjustable current limiting function can be realized through external resistance
High precision current detection function, which can detect the antenna open circuit under low current without further calibration
High power rejection ratio: 73db at 100Hz
Integrated reverse polarity protection, as low as -40v and no external diode is required
When the load current is 100mA, the maximum voltage drop is 500mv
It can be stable when used with output capacitors in the range of 2.2 µ f to 100 µ f (ESR is 1m Ω to 5 Ω)
Integrated protection and diagnostics
Thermal shutdown
Undervoltage lockout (UVLO)
Short circuit protection
Reverse battery polarity protection
Reverse current protection
Output battery short circuit protection
Output end inductive load clamping
Multiplexing of current detection functions between multichannels / devices
It can distinguish all faults through current detection function
16 pin htssop powerpad ™ encapsulation
Description of tps7b7702-q1
Tps7b770x-q1 series devices adopt single channel and dual channel high-voltage low-voltage differential regulators (LDOS) with current detection function, which are suitable for working in a wide input voltage range from 4.5V to 40V (45V load sudden drop protection). These devices supply power to the low noise amplifier of the active antenna through a coaxial cable with a current of 300mA per channel. Each channel can also provide an adjustable output voltage of 1.5V to 20V.
These devices provide diagnostics through current detection and error pins. To monitor the load current, the high side current detection circuit provides an analog output proportional to the detected load current. The current detection function is very accurate and can detect open circuit, normal and short circuit conditions without further correction. Current detection can be multiplexed between channels and devices to save analog-to-digital converter (ADC) resources. Each channel also realizes adjustable current limiting function through external resistance.
The reverse polarity diode is integrated, so no external diode is required. These devices have standard thermal shutdown function, output battery short-circuit protection function and reverse current protection function. Each channel can provide internal inductive clamping protection for the output during the disconnection of the inductive switch.
The operating ambient temperature range of these devices is -40 ° C to +125 ° C.
Meet the requirements of automotive applications
It has the following characteristics in accordance with aec-q100 standard:
Device temperature level 1: ambient operating temperature range from – 40 ° C to 125 ° C
Device human body discharge mode (HBM) electrostatic discharge (ESD) classification level 2
Device component charging mode (CDM) ESD classification level C4B
Single channel and dual channel low voltage drop regulators (LDOS) with current detection and adjustable current limiting functions
4.5V to 40V wide input voltage range, 45V load sudden drop protection
Enter the power switch mode when FB is connected to GND
1.5V to 20V adjustable output voltage
The output current of each channel is up to 300mA
Adjustable current limiting function can be realized through external resistance
High precision current detection function, which can detect the antenna open circuit under low current without further calibration
High power rejection ratio: 73db at 100Hz
Integrated reverse polarity protection, as low as -40v and no external diode is required
When the load current is 100mA, the maximum voltage drop is 500mv
It can be stable when used with output capacitors in the range of 2.2 µ f to 100 µ f (ESR is 1m Ω to 5 Ω)
Integrated protection and diagnostics
Thermal shutdown
Undervoltage lockout (UVLO)
Short circuit protection
Reverse battery polarity protection
Reverse current protection
Output battery short circuit protection
Output end inductive load clamping
Multiplexing of current detection functions between multichannels / devices
It can distinguish all faults through current detection function
16 pin htssop powerpad ™ encapsulation
Description of tps7b7702-q1
Tps7b770x-q1 series devices adopt single channel and dual channel high-voltage low-voltage differential regulators (LDOS) with current detection function, which are suitable for working in a wide input voltage range from 4.5V to 40V (45V load sudden drop protection). These devices supply power to the low noise amplifier of the active antenna through a coaxial cable with a current of 300mA per channel. Each channel can also provide an adjustable output voltage of 1.5V to 20V.
These devices provide diagnostics through current detection and error pins. To monitor the load current, the high side current detection circuit provides an analog output proportional to the detected load current. The current detection function is very accurate and can detect open circuit, normal and short circuit conditions without further correction. Current detection can be multiplexed between channels and devices to save analog-to-digital converter (ADC) resources. Each channel also realizes adjustable current limiting function through external resistance.
The reverse polarity diode is integrated, so no external diode is required. These devices have standard thermal shutdown function, output battery short-circuit protection function and reverse current protection function. Each channel can provide internal inductive clamping protection for the output during the disconnection of the inductive switch.
The operating ambient temperature range of these devices is -40 ° C to +125 ° C.