Stm8s003f3p6 tssop-20 8-bit microcontroller MCU
describe
Stm8s003f3 / K3 value line 8-bit microcontroller provides 8Kbytes flash program memory and integrated true data EEPROM. In the reference manual of stm8s microcontroller series (rm0016), they are called low-density devices. Stm8s003f3 / K3 value line equipment has the following advantages: performance, robustness and reducing system cost.
Device performance and robustness are ensured by real data EEPROM supporting up to 100000 write / erase cycles, * * cores and peripherals manufactured with newer technology with 16 MHz clock frequency, robust I / O, independent watchdog with independent clock source and clock security system.
Due to the high system integration of internal clock oscillator, watchdog and power loss reset, the system cost is reduced.
It provides complete documents and a variety of development tools.
All functions
kernel
16 MHz * * stm8 core with Harvard architecture and three-stage pipeline
Extended instruction set
memory
Program memory: 8kbyte flash memory; At age 55, the data were retained for 20 years after 100 cycles at ° C
Memory: 1 kilobyte
Data memory: 128 byte true data EEPROM; Durability up to 100 K write / erase cycles
Clock, reset and power management
Operating voltage 95.5 V to 95.5 V
Flexible clock control, 4 master clock sources
Low power crystal resonator oscillator
External clock input
Internally, the user can fine tune the 16 MHz RC
Internal low power 128 kHz RC
Clock safety system with clock monitor
Power management
Low power mode (wait, activity stop, stop)
Turn off the peripheral clock respectively
*Activation, low power on and power off reset
Interrupt management
Nested interrupt controller with 32 interrupts
More 27 external interrupts on 6 vectors
timer
**Time controller: 16 bits, 4 Capcom channels, 3 complementary outputs, dead time insertion and flexible synchronization
16 Bit Universal timer with 3 Capcom channels (IC, OC or PWM)
8-bit basic timer with 8-bit Prescaler
Automatic wake-up timer
Window and independent watchdog timer
communication interface
UART with clock output is used for synchronous operation, smart card, IrDA and Lin master mode
SPI interface with higher 8 Mbit / S
I2C interface up to 400 kbit/s
Analog to digital converter
10 bit ADC, ± 1 LSB ADC with up to 5 multiplex channels, scan mode and analog watchdog
Input / output
There are more 28 I / OS on the 32 pin package, including 21 high receiver outputs
Highly robust I / O design for current injection
Development support
Embedded single line interface module (swim) for * * on-chip programming and non intrusive debugging
Stm8s003f3 / K3 value line 8-bit microcontroller provides 8Kbytes flash program memory and integrated true data EEPROM. In the reference manual of stm8s microcontroller series (rm0016), they are called low-density devices. Stm8s003f3 / K3 value line equipment has the following advantages: performance, robustness and reducing system cost.
Device performance and robustness are ensured by real data EEPROM supporting up to 100000 write / erase cycles, * * cores and peripherals manufactured with newer technology with 16 MHz clock frequency, robust I / O, independent watchdog with independent clock source and clock security system.
Due to the high system integration of internal clock oscillator, watchdog and power loss reset, the system cost is reduced.
It provides complete documents and a variety of development tools.
All functions
kernel
16 MHz * * stm8 core with Harvard architecture and three-stage pipeline
Extended instruction set
memory
Program memory: 8kbyte flash memory; At age 55, the data were retained for 20 years after 100 cycles at ° C
Memory: 1 kilobyte
Data memory: 128 byte true data EEPROM; Durability up to 100 K write / erase cycles
Clock, reset and power management
Operating voltage 95.5 V to 95.5 V
Flexible clock control, 4 master clock sources
Low power crystal resonator oscillator
External clock input
Internally, the user can fine tune the 16 MHz RC
Internal low power 128 kHz RC
Clock safety system with clock monitor
Power management
Low power mode (wait, activity stop, stop)
Turn off the peripheral clock respectively
*Activation, low power on and power off reset
Interrupt management
Nested interrupt controller with 32 interrupts
More 27 external interrupts on 6 vectors
timer
**Time controller: 16 bits, 4 Capcom channels, 3 complementary outputs, dead time insertion and flexible synchronization
16 Bit Universal timer with 3 Capcom channels (IC, OC or PWM)
8-bit basic timer with 8-bit Prescaler
Automatic wake-up timer
Window and independent watchdog timer
communication interface
UART with clock output is used for synchronous operation, smart card, IrDA and Lin master mode
SPI interface with higher 8 Mbit / S
I2C interface up to 400 kbit/s
Analog to digital converter
10 bit ADC, ± 1 LSB ADC with up to 5 multiplex channels, scan mode and analog watchdog
Input / output
There are more 28 I / OS on the 32 pin package, including 21 high receiver outputs
Highly robust I / O design for current injection
Development support
Embedded single line interface module (swim) for * * on-chip programming and non intrusive debugging